RM3090E _58 Vehicle Interior _008791 INTERIOR PANELS / TRIM _0049317 ROOF HEADLINING A

INTERIOR PANELS / TRIM  ROOF HEADLINING  REASSEMBLY  


PROCEDURE

Hide 63364 1.INSTALL NO. 4 ROOF HEADLINING SUPPORT (w/ Roof Headlining Support, w/ Sliding Roof)

a.
B341028
1.573,0.906 1.729,1.104 0.156,0.198 10 false .
.
V100146

Marking
V100155

Peeling Paper


Align the No. 4 roof headlining support with the marking on the roof headlining and install the No.4 roof headlining support to the position shown in the illustration using adhesive or double-sided tape.

NOTICE:

If replacing a new No. 4 roof headlining support:

At this time, do not remove the peeling paper from the No. 4 roof headlining support.



Hide 63363 2.INSTALL NO. 3 ROOF HEADLINING SUPPORT (w/ Roof Headlining Support, w/ Sliding Roof)

HINT:

Use the same procedure described for the No. 4 roof headlining support.


Hide 63362 3.INSTALL NO. 2 ROOF HEADLINING SUPPORT (w/ Roof Headlining Support)

a.
B341024
1.219,1.01 1.396,1.271 0.177,0.26 10 false .
.
V100146

Marking


w/o Sliding Roof:

Align the No. 2 roof headlining support with the marking on the roof headlining and install the No.2 roof headlining support to the position shown in the illustration using adhesive or double-sided tape.


b.
B341027
1.583,0.885 1.74,1.083 0.156,0.198 10 false .
.
V100146

Marking
V100155

Peeling Paper


w/ Sliding Roof:

Align the No. 2 roof headlining support with the marking on the roof headlining and install the No.2 roof headlining support to the position shown in the illustration using adhesive or double-sided tape.

NOTICE:

If replacing a new No. 2 roof headlining support:

At this time, do not remove the peeling paper from the No. 2 roof headlining support.



Hide 63361A 4.INSTALL ROOF HEADLINING SUPPORT (w/ Roof Headlining Support)

HINT:

Use the same procedure described for the No. 2 roof headlining support.


Hide 82171 6.INSTALL NO. 1 ROOF WIRE

a.

w/o Roof Headlining Support, w/o Sliding Roof:

i.

Apply new double-sided tape as shown in the illustration.

B337940
4.927,5.708 5.24,5.906 0.313,0.198 10 *a 5.625,6.115 5.938,6.313 0.313,0.198 10 *b
*a
*b
*a 1 mm (0.0394 in.) *b 15 mm (0.590 in.)
V100146

Double-sided Tape - -



ii.

Attach the No. 1 roof wire to the double-sided tape.


iii.

Apply new one-sided tape.


iv.

Turn the 2 connectors approximately 90° counter clockwise to connect them.


v.

If any slack forms, take up the slack in the areas A shown in the illustration.

NOTICE:

Secure any wire that protrudes from the double-sided tape with one-sided tape.


B365002
6.521,5.083 6.698,5.083 6.698,5.083 6.75,4.781 false 2.417,0.271 2.729,0.427 0.313,0.156 10 false *A 4.927,1.333 5.406,1.51 0.479,0.177 10 false *B, *D 2.531,0.896 2.844,1.052 0.313,0.156 10 false *C 3.01,0.583 3.323,0.74 0.313,0.156 10 false *E 3.917,0.375 4.229,0.531 0.313,0.156 10 false *F 6.365,4.99 6.677,5.146 0.313,0.156 10 false *1 0.979,3.719 1.167,3.875 0.188,0.156 10 true *a 2.604,3.115 2.792,3.313 0.188,0.198 10 true A 2.729,5.177 3.208,5.354 0.479,0.177 10 false *B, *E 2.594,3.75 2.781,3.958 0.188,0.208 10 true A 5.938,1.469 6.25,1.625 0.313,0.156 10 false *C 4.021,5.208 4.333,5.365 0.313,0.156 10 false *C 3.198,5.49 3.51,5.646 0.313,0.156 10 false *E 2.698,5.771 3.01,5.927 0.313,0.156 10 false *F 6.073,4.26 6.26,4.469 0.188,0.208 10 false A
*A
*B, *D
*C
*E
*F
*1
*a
A
*B, *E
A
*C
*C
*E
*F
A
*A for LHD *B for RHD
*C w/ EC Mirror *D w/o Lane Departure Alert System
*E w/ Lane Departure Alert System *F w/ Rain Sensor
*1 No. 1 Roof Wire - -
*a 90° - -
V100146

One-sided Tape
V100155

Double-sided Tape



vi.

Check that the No. 1 roof wire is not twisted, raised, or protruding in any way.



b.

w/ Roof Headlining Support, w/o Sliding Roof:

i.

Apply new double-sided tape as shown in the illustration.

B341016
4.927,5.708 5.24,5.865 0.313,0.156 10 *a 5.615,6.104 5.927,6.26 0.313,0.156 10 *b
*a
*b
*a 1 mm (0.0394 in.) *b 15 mm (0.590 in.)
V100146

Double-sided Tape - -



ii.

Attach the No. 1 roof wire to the double-sided tape.


iii.

Apply new one-sided tape.


iv.

Turn the 2 connectors approximately 90° counter clockwise to connect them.


v.

If any slack forms, take up the slack in the areas A shown in the illustration.

NOTICE:

Secure any wire that protrudes from the double-sided tape with one-sided tape.


B341017
6.427,5.396 6.615,5.396 6.615,5.396 6.698,5.104 false 2.719,0.844 3.031,1 0.313,0.156 10 false *A 6.271,5.292 6.583,5.448 0.313,0.156 10 false *1 0.99,3.99 1.167,4.167 0.177,0.177 10 true *a 3.042,0.667 3.354,0.823 0.313,0.156 10 false *B 2.604,3.479 2.76,3.677 0.156,0.198 10 true A 2.615,4.073 2.771,4.271 0.156,0.198 10 true A 6.063,4.573 6.219,4.771 0.156,0.198 10 false A
*A
*1
*a
*B
A
A
A
*A w/ EC Mirror *B w/ Lane Departure Alert System
*1 No. 1 Roof Wire - -
*a 90° - -
V100146

One-sided Tape
V100155

Double-sided Tape



vi.

Check that the No. 1 roof wire is not twisted, raised, or protruding in any way.



c.

w/o Roof Headlining Support, w/ Sliding Roof:

i.

Apply new double-sided tape as shown in the illustration.

B337941
4.938,5.698 5.25,5.896 0.313,0.198 10 *a 5.635,6.115 5.948,6.313 0.313,0.198 10 *b
*a
*b
*a 1 mm (0.0394 in.) *b 15 mm (0.590 in.)
V100146

Double-sided Tape - -



ii.

Attach the No. 1 roof wire to the double-sided tape.


iii.

Apply new one-sided tape.


iv.

Turn the 2 connectors approximately 90° counter clockwise to connect them.


v.

If any slack forms, take up the slack in the areas A shown in the illustration.

NOTICE:

Secure any wire that protrudes from the double-sided tape with one-sided tape.


B365000
6.479,5.104 6.667,5.104 6.667,5.104 6.74,4.792 false 5.927,0.635 6.24,0.792 0.313,0.156 10 false *C 3.198,5.531 3.51,5.688 0.313,0.156 10 false *E 5.167,0.875 5.479,1.031 0.313,0.156 10 false *F 2.208,0.25 2.521,0.406 0.313,0.156 10 false *A 4.885,0.573 5.302,0.74 0.417,0.167 10 false *B, *D 2.323,0.823 2.635,0.979 0.313,0.156 10 false *C 2.719,0.552 3.031,0.708 0.313,0.156 10 false *E 3.677,0.292 3.99,0.448 0.313,0.156 10 false *F 6.323,5 6.635,5.156 0.313,0.156 10 false *1 0.99,3.688 1.188,3.865 0.198,0.177 10 true *a 2.594,3.167 2.792,3.344 0.198,0.177 10 false A 2.74,5.219 3.156,5.385 0.417,0.167 10 false *B, *E 6.083,4.24 6.281,4.417 0.198,0.177 10 false A 2.594,3.76 2.792,3.938 0.198,0.177 10 false A 2.719,5.792 3.031,5.948 0.313,0.156 10 false *F 4.042,5.25 4.354,5.406 0.313,0.156 10 false *C
*C
*E
*F
*A
*B, *D
*C
*E
*F
*1
*a
A
*B, *E
A
A
*F
*C
*A for LHD *B for RHD
*C w/ EC Mirror *D w/o Lane Departure Alert System
*E w/ Lane Departure Alert System *F w/ Rain Sensor
*1 No. 1 Roof Wire - -
*a 90° - -
V100146

One-sided Tape
V100155

Double-sided Tape



vi.

Check that the No. 1 roof wire is not twisted, raised, or protruding in any way.



d.

w/ Roof Headlining Support, w/ Sliding Roof:

i.
B342241
1.323,0.979 1.479,1.177 0.156,0.198 10 false .
.
V100155

Double-sided Tape


If reusing the No. 4 roof headlining support:

Apply new double-sided tape as shown in the illustration.


ii.

If replacing the No. 4 roof headlining support:

Remove the peeling paper from the No. 4 roof headlining support.


iii.
B342242
2.469,1.031 2.625,1.229 0.156,0.198 10 false .
.
V100155

Double-sided Tape


If reusing the No. 2 roof headlining support:

Apply new double-sided tape as shown in the illustration.


iv.

If replacing the No. 2 roof headlining support:

Remove the peeling paper from the No. 2 roof headlining support.


v.

Apply new double-sided tape as shown in the illustration.

B341019
4.938,5.698 5.25,5.854 0.313,0.156 10 *a 5.625,6.104 5.938,6.26 0.313,0.156 10 *b
*a
*b
*a 1 mm (0.0394 in.) *b 15 mm (0.590 in.)
V100146

Double-sided Tape - -



vi.

Attach the No. 1 roof wire to the double-sided tape.


vii.

Apply new one-sided tape.


viii.

Turn the 2 connectors approximately 90° counter clockwise to connect them.


ix.

If any slack forms, take up the slack in the areas A shown in the illustration.

NOTICE:

Secure any wire that protrudes from the double-sided tape with one-sided tape.


B341020
6.385,5.542 6.615,5.542 6.615,5.542 6.677,5.229 false 2.698,0.823 3.01,0.979 0.313,0.156 10 false *A 3.031,0.646 3.344,0.802 0.313,0.156 10 false *B 6.208,5.469 6.521,5.625 0.313,0.156 10 false *1 0.969,4.01 1.146,4.208 0.177,0.198 10 true *a 5.99,4.698 6.146,4.896 0.156,0.198 10 false A 2.594,3.49 2.75,3.688 0.156,0.198 10 false A 2.594,4.073 2.75,4.271 0.156,0.198 10 false A
*A
*B
*1
*a
A
A
A
*A w/ EC Mirror *B w/ Lane Departure Alert System
*1 No. 1 Roof Wire - -
*a 90° - -
V100146

One-sided Tape
V100155

Double-sided Tape



x.

Check that the No. 1 roof wire is not twisted, raised, or protruding in any way.



Hide 81340J 7.INSTALL VANITY LIGHT ASSEMBLY LH

a.

Attach the claw to install the vanity light assembly LH.


b.

Attach the 2 claws to connect the bulb holder to the vanity light assembly LH.


Hide 81340H 8.INSTALL VANITY LIGHT ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.


Hide 63352D 9.INSTALL NO. 2 ROOF HEADLINING PAD (w/o Roof Headlining Support, for Cold Area)

a.

Remove the peeling paper from a new No. 2 roof headlining pad.


b.
B337933
1.604,1.063 1.76,1.26 0.156,0.198 10 false .
.
V100146

Silencer Marking


Align the No. 2 roof headlining pad end with the silencer markings on the roof headlining and install the No. 2 roof headlining pad end as shown in the illustration.


Hide 63352D 10.INSTALL NO. 2 ROOF HEADLINING PAD (w/ Roof Headlining Support)

a.

Remove the peeling paper from a new No. 2 roof headlining pad.


b.
B337933
1.604,1.063 1.76,1.26 0.156,0.198 10 false .
.
V100146

Silencer Marking


Align the No. 2 roof headlining pad end with the silencer markings on the roof headlining and install the No. 2 roof headlining pad end as shown in the illustration.


Hide 63351B 11.INSTALL ROOF HEADLINING PAD (w/o Roof Headlining Support, for Cold Area)

HINT:

Use the same procedure for both roof headlining pads.


a.

Remove the peeling paper from a new roof headlining pad.


b.
B337932C01
1.854,0.906 1.938,1.563 0.083,0.656 10 false .
V100146

Silencer Marking


Align the roof headlining pad with the silencer markings on the roof headlining and install the roof headlining pad as shown in the illustration.


Hide 63351B 12.INSTALL ROOF HEADLINING PAD (w/ Roof Headlining Support)

HINT:

Use the same procedure for both roof headlining pads.


a.

Remove the peeling paper from a new roof headlining pad.


b.
B337932C01
1.854,0.906 1.938,1.563 0.083,0.656 10 false .
V100146

Silencer Marking


Align the roof headlining pad with the silencer markings on the roof headlining and install the roof headlining pad as shown in the illustration.


Hide 63343 13.INSTALL NO. 3 ROOF SILENCER PAD

a.
B337936C01
1.229,2.292 1.385,2.49 0.156,0.198 10 false .
V100146

Silencer Marking


Align the No. 3 roof silencer pad with the silencer markings on the roof headlining and install the No. 3 roof silencer pad using adhesive or double-sided tape.


Hide 63341 14.INSTALL NO. 1 ROOF SILENCER PAD (w/o Sliding Roof)

a.

Align the 5 No. 1 roof silencer pads with the silencer markings on the roof headlining and install the 5 No. 1 roof silencer pads using adhesive or double-sided tape.

B337934C01
4.771,1.552 4.927,1.75 0.156,0.198 10 false .
V100146

Silencer Marking - -



Hide 63341 15.INSTALL NO. 1 ROOF SILENCER PAD (w/ Sliding Roof)

a.
B337935C01
1.417,2.385 1.573,2.583 0.156,0.198 10 false .
V100146

Silencer Marking


Align the No. 1 roof silencer pads with the silencer markings on the roof headlining and install the 2 No. 1 roof silencer pads using adhesive or double-sided tape.


Hide 63355C 16.INSTALL ROOF HEADLINING PAD RH (w/ Roof Headlining Support)

a.
B341023
1.583,1.104 1.74,1.302 0.156,0.198 10 false .
.
V100146

Silencer Marking


Align the roof headlining pad RH end with the silencer markings on the roof headlining and install the roof headlining pad RH using adhesive or double-sided tape.


Hide 63353C 17.INSTALL CENTER ROOF HEADLINING PAD

a.

Remove the 2 peeling papers from 2 new center roof headlining pads.


b.

Align the 2 center roof headlining pads end with the silencer markings on the roof headlining and install the 2 center roof headlining pads end as shown in the illustration.

B367337C01
1.302,1.875 1.052,1.875 1.052,1.875 1.01,1.583 true 3.427,1.875 3.708,1.875 3.708,1.875 3.844,1.552 true 5.635,1.604 5.635,1.135 true 5.865,0.948 6.24,0.948 6.24,0.948 6.24,1.313 true 6.24,1.208 6.073,1.208 true 5.844,1.354 5.646,1.354 true 0.333,0.677 0.646,0.833 0.313,0.156 10 true *A 2.698,0.677 3.01,0.833 0.313,0.156 10 true *B 5.031,0.667 5.344,0.823 0.313,0.156 10 true *C 1.333,1.771 1.646,1.927 0.313,0.156 10 true *a 3.271,1.771 3.583,1.927 0.313,0.156 10 true *a 6.146,1.323 6.448,1.521 0.302,0.198 10 true *a 5.542,1.625 5.813,1.823 0.271,0.198 10 true *a
*A for RH Side *B for LH Side, Type A
*C for LH Side, Type B - -
*a Silencer Marking - -